Review: Xclaim Wireless AP – enterprise class 801.11ac Wi-Fi For Your Home?

The Automated home Wi-Fi network is critical. If there’s even a blip in service the family seem to go into melt down.

More and much more devices are hanging off our wireless LAN, laptops, smartphones, tablets, IP CCTV Cameras, energy Monitors, weather stations the list goes on, so it needs to be fast, far-reaching and reliable.

So when the men at LinITX told us about their new Xclaim WAPs our ears pricked up. The range currently consists of 1 outdoor and 3 indoor units and although they are aimed at SMB and small office-home office (SOHO) users Xclaim describe them as “Wi-Fi for the Non-IT Guy”, promoting their ease of setup. They recommend them for networks of up to 10 access points and up to 100 users.

Some of our new MacBooks and iPhones now support the new fast 802.11ac conventional so we were keen to try the Xclaim Xi-3, a dual-band, dual-radio (simultaneous 2.4Ghz and 5Ghz) AP that supports 802.11a/b/g/n/ac with aggregated throughputs of up to 1.167 Gigabits per second.

នៅ​ក្នុង​ប្រអប់

In the box you’ll find the unit itself, which is similar in looks to the first generation Apple Time capsule although slightly smaller 15.8 cm x 15.8 cm x 4 cm.  It’ll sit nicely on a desktop or if you choose there’s a wall mounting plate included plus T-Bar clips to mount it to a suspended ceilings in a commercial setting.

It comes with a Power over Ethernet injector, we really like PoE as it implies running a single cable television (there are 2 ethernet cable televisions are included in the box too). Xclaim say the unit ‘typically’ consumes around 6 watts in use.

Setup

Set up of the WAP is all done through the totally free harmony for Xclaim App that’s available for the iphone and iPad (iOS) and Android.

We set the whole thing up using the app’s guided wizard on our iphone and after an initial reboot so the unit could upgrade itself to the most recent firmware all went without a hitch.

That latest firmware (version 1.0.0.0.89 reviewed) also brings with it a new web interface to monitor and configure the unit. It’s fairly sparse for now though with only the basics available in your browser window.

You can create up to 4 separate Wi-Fi networks (SSIDs) per access point and you can assign different SSIDs to the 2.4GHz and 5Ghz bands.

Performance

Xclaim is made by Ruckus and features their ‘multiple polarization antenna’ (PD-MRC) technology.

We currently use 3 Apple access points to cover the whole house. We replaced them with this single unit siting it fairly centrally upstairs. Impressively it reached almost the entire house, just cutting out at the extremes of one side. In our test the 5GHz network held on well too, measuring only marginally weaker than the lower frequencies much more easily propagating signal. Network speeds seemed on a power with the Apple setup too.

One unusual thing we discovered was our Sky+ iphone app only worked if we were on the 5GHz SSID, refusing to work on the 2.4GHz one (it worked fine on either with the Apple setup). also when scanning our LAN (using the outstanding Debookee Mac app) it could not see devices connected to the other SSID. again this was not the case when using our old setup. If you’re searching for much more family friendly features (timed access for example) you may again be better off taking a look at the Apple airport Extreme which costs around £10 more.

RELATED: Quality home Wi-Fi Networks with Ubiquiti UniFi

It seems unusual that these units initially shipped without any browser interface and reading through the Xclaim support forums it’s clear that this is a product that’s still in its infancy. It will probably take several much more firmware updates to mature to the level of its competitors.

The Xclaim APs start at around £70 for the i1 with this i3 version evaluated costing around £160. That compares to £225 for the Ubiquity UniFi 802.11ac equivalent so there’s a lot to like about the price and although there are some issues with the current feature set we can’t fault the i3’s speed and especially its range around the Automated Home.

xclaimwireless.com  :  Xclaim at Linitx.com

ចង់បានបន្ថែមទៀត? – តាមដានពួកយើងនៅលើ Twitter ដូចអាមេរិកនៅលើហ្វេសប៊ុកឬជាវព័ត៌មាន RSS របស់យើង។ You can even get these news stories delivered through email, straight to your inbox every day.

ចែករំលែកនេះ:
ដេលតាក់តរ
អិនតតឹក
reddit
LinkedIn
Pinterest
អ៊ីមែល
រេចីនចាង

whatsapp
អកសរបុម្ក

សន្ដិសុខ
tumblr

តេលេរកាម
ហោប៉ោ

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Post

3 ការជួសជុលគំនិតតាមបន្ទប់ក្រោមដីដើម្បីកែសំរួលទំហំរបស់អ្នកឡើងវិញ3 ការជួសជុលគំនិតតាមបន្ទប់ក្រោមដីដើម្បីកែសំរួលទំហំរបស់អ្នកឡើងវិញ

ការចែករំលែកគឺការយកចិត្តទុកដាក់! ធ្វកធូ 2 ការរមលេក ម្ជុល ការរមលេក របស់ផ្ញើរតាមប៉ុស្ដិ៍ ប្រសិនបើអ្នកកំពុងស្វែងរកកន្លែងរស់នៅច្រើនទៀតសូមពិចារណាការអភិវឌ្ឍជាន់ក្រោមឬការជួសជុល។ មានវិធីជាច្រើនដើម្បីបង្កើនទំហំបន្ទប់ក្រោមដីរបស់អ្នកឱ្យបានច្រើនបំផុតដើម្បីទទួលបានការប្រើប្រាស់ច្រើនបំផុតចេញពីវា។ មិនត្រឹមតែនេះទេដែលផ្តល់ឱ្យអ្នកនូវកន្លែងដែលមានមុខងារច្រើនសម្រាប់គ្រួសារអ្នកប៉ុន្តែវាក៏អាចបង្កើនតម្លៃលក់បន្តផងដែរ។ អ្នកម៉ៅការសញ្ញាដាច់ដោយឡែកនៅ Winnipeg គឺជាអ្នកជំនាញនៅពេលដែលវាព្រួយបារម្ភការជួសជុលបន្ទប់ក្រោមដី។ ពួកគេផ្តល់នូវគំនិតចំនួនបីអំពីរបៀបកែលម្អចន្លោះបន្ទប់ក្រោមដីរបស់អ្នក។ 1. បារភ្ជាប់ ការបន្ថែមបារដែលមានស្រាប់ទៅបន្ទប់ក្រោមដីរបស់អ្នកមានអត្ថប្រយោជន៍ជាច្រើន។ វាអាចងាយស្រួលសម្រាប់ការរក្សាទុកភេសជ្ជៈនិងអាហារសម្រន់ – ការសន្សំអ្នកធ្វើដំណើរជាន់ខាងលើផ្ទះបាយខណៈពេលកំពុងដើរលេងនៅជាន់ក្រោម។ របារសើមដែលភ្ជាប់មកជាមួយដែលមានស្រាប់ក៏អាចមានប្រយោជន៍សម្រាប់ការកម្សាន្តនាពេលអនាគតដែរ។ វាអាចជាអ្វីដែលតូចដូចជាកន្លែងដែលបានកំណត់ដើម្បីទុកភេសជ្ជៈរបស់អ្នកទៅកន្លែងបារទាំងមូល។ នេះអាចរួមបញ្ចូលទាំងការរាប់ដែលមានលាមករបារលិចទូរទឹកកក, ទូរទឹកកក, ទូរទឹកកក, ទូរទឹកកក, ទូរទឹកកក, ទូរទឹកកក, ទូរទឹកកក, ទូរទឹកកក,

ទូរទស្សន៍ Marmitek ‘គ្រប់ទីកន្លែង WiRsele HD’ ការបញ្ជូនទិន្នផល 1080p HDMI ទៅកន្លែងមួយបន្ថែមទៀតទូរទស្សន៍ Marmitek ‘គ្រប់ទីកន្លែង WiRsele HD’ ការបញ្ជូនទិន្នផល 1080p HDMI ទៅកន្លែងមួយបន្ថែមទៀត

Wireless Wireless គឺជារឿងមួយនៅទសវត្សរ៍ទី 90 ដែលត្រូវបានចងចាំដោយប្រាសាទ X10?)) ។ ឥឡូវនេះ Marmitek សន្យាថានឹងផ្ញើវីដេអូ HD បន្ថែមលើ IR ជាមួយនឹងទូរទស្សន៍ថ្មីរបស់ខ្លួននៅគ្រប់ទីកន្លែងប្រព័ន្ធ HD ឥតខ្សែ។ ឯកតាឥតខ្សែឧបករណ៍បញ្ជូនដែលជាឧបករណ៍បញ្ជូនក៏ដូចជាអ្នកទទួលអាចផ្ញើសញ្ញា HD 1080p HDMI ដែលមានទំហំ 50 មជាមួយនឹងជញ្ជាំងក៏ដូចជាពិដានជុំវិញផ្ទះរបស់អ្នក។ ឧទាហរណ៍អ្នកអាចផ្ញើកម្មវិធីចាក់កាំរស្មីប៊្លូរ៉ាសមេឃព្រហ្មចារីព្រហ្មចារីឬទិន្នផលផ្កាយរណបផ្សេងទៀតឬផ្កាយរណបទៅទូរទស្សន៍បន្ទប់គេង។ ឬប្រហែលជាប្រើប្រព័ន្ធដើម្បីផ្ញើសញ្ញាឱ្យមានច្រើនដូចម៉ាស៊ីនបញ្ចាំង។ មុខងារចន្លោះចំហរអាចឱ្យអ្នករីករាយនឹងសម្ភារៈដដែលពិតប្រាកដនៅឯពីរកន្លែងក្នុងពេលដំណាលគ្នាក៏ដូចជាអ្នកអាចធ្វើប្រតិបត្តិការឧបករណ៍ AV របស់អ្នកពីចម្ងាយដោយប្រើមុខងារត្រឡប់មកវិញអ៊ីនហ្វ្រារ៉េដរបស់វាពីចម្ងាយ។ អ្នកថែមទាំងអាចភ្ជាប់ក្តារចុចរបស់អ្នកក៏ដូចជាកណ្តុរទៅអ្នកទទួលដើម្បីគ្រប់គ្រងកុំព្យូទ័រពីចម្ងាយ។ រដ្ឋ

ដំណើរកម្សាន្តតាមវីដេអូនៃការតំឡើងពីផ្ទះរថយន្តស៊ី – ឡានក្រុង C-B-B-B-B-Winceដំណើរកម្សាន្តតាមវីដេអូនៃការតំឡើងពីផ្ទះរថយន្តស៊ី – ឡានក្រុង C-B-B-B-B-Wince

អ្នកអានផ្ទះស្វ័យប្រវត្តិមានរយៈពេលយូរ (ហើយបានតំឡើង) ប្រព័ន្ធឡានក្រុង C-C-Bus ។ នេះគឺជាដំណើរកម្សាន្តដែលគួរឱ្យចាប់អារម្មណ៍នៅជុំវិញផ្ទះរបស់ Kevin O’Connor (CIO នៅឯ Paddy Borkers ប្រព័ន្ធដែលមានមូលដ្ឋានលើរថយន្តក្រុងដែលគាត់បានដំឡើងជាផ្នែកមួយនៃគម្រោងជួសជុល 1 លាន Reaster ថ្មី។ “ជាជាងសាងសង់អាងហែលទឹកក្នុងផ្ទះក្នុងផ្ទះឬធ្វើឱ្យបន្ទប់លេងកីឡាវាយកូនបាល់គឺក្រុមហ៊ុនស៊ីអូអូនៅឯប្រព័ន្ធស្វ័យប្រវត្តិកម្មផ្ទះមួយសម្រាប់គម្រោងអភិវឌ្ឍន៍ផ្ទះរបស់គាត់ដែលមានតម្លៃជាង 1 លានផោន។ ប្រព័ន្ធស្វ័យប្រវត្តិកម្មនៅផ្ទះក្លីបដែលគ្រប់គ្រងភ្លើងដែលមានកំដៅដោយកំដៅនិងឧស្ម័ន។ សូម្បីតែការបើកវាំងនួននិងការបិទមហោស្រពក៏ត្រូវបានរៀបចំកម្មវិធីដោយប្រើភាសាសរសេរកម្មវិធី Pascal ដែរ “។ www.computerweekly.com [សូមអរគុណ IAN]: www.cbus-shop.com ចង់បានបន្ថែមទៀត?